Our All Products
CALORIMETER
.png)
CALORIMETER,COPPER
Description:
• Copper, With parallel sides and rolled rim, without stirrer.
| Product Code | CLM/PHY/H-024A | CLM/PHY/H-024B | CLM/PHY/H-024C |
| Size | 75 x 50 mm | 100 x 65 mm | 100 x 75 mm |
| Specification of 100 x 75 mm diameter | |||
| Weight (kg) | Length (cm) | Width (cm) | Height (cm) |
| 1.86 | 40 | 17 | 19 |
| Specification of 75 x 50 mm diameter | |||
| Weight (kg) | Length (cm) | Width (cm) | Height (cm) |
| 0.9100 | 27 | 19 | 7 |
CALORIMETER,ALUMINIUM
Description:
• Aluminium without stirrer.
• With parallel sides and
• Rolled rim.
| Product Code | CLM/PHY/H-025A | CLM/PHY/H-025B | CLM/PHY/H-025C |
| Size | 75 x 50 mm | 100 x 65 mm | 100 x 75 mm |
OUTER VESSEL FOR CALORIMETER
Description:
• With rolled-on bottom, rolled rim.
| Product Code | CLM/PHY/H-026A | CLM/PHY/H-026B | CLM/PHY/H-026C | CLM/PHY/H-026D |
| Metal | Aluminium | Aluminium | Copper | Copper |
| Size | 90 x 65 mm | 115 x 90 mm | 90 x 65 mm | 115 x 90 mm |
CALORIMETER STIPPER,copper and aluminium
CALORIMETER STIPPER,copper and aluminium
Description:
• Size 150 x 48 mm, 3 mm wire, with plastic handle at upper end of stirrer and loop at bottom.
| Product Code | CLM/PHY/H-027A | CLM/PHY/H-027B |
| Metal | Aluminium | Copper |
| Size | 150 x 48 mm | 150 x 48 mm |
CALORIMETER SET,jointless copper calorimeter
CALORIMETER SET,jointless copper calorimeter
Description:
• Consisting of a jointless copper calorimeter.
• Rubber supports are 75x50 mm.
• Spun outer copper vessel of 100x75 mm diam. copper lid for outer vessel with central tubule for thermometer and slit for copper stirrer.
• with a looped copper stirrer for the inner vessel.
Product Code :- CLM/PHY/H-028
CALORIMETER SET,jointless copper and aluminium
CALORIMETER SET,jointless copper and aluminium
Description:
• Copper calorimeter 75 x 50 mm with felt insulation.
• Outer vessel of 100 x 65 mm size with a plastic lid.
• Having holes for thermometer & stirrer.
• A thermometer holder is fixed to the outer vessel.
• Complete with stirrer.
| Product Code | |
| CLM/PHY/H-029A | With outer vessel of copper |
| CLM/PHY/H-029B | With outer vessel of aliminium |
CALORIMETER,JOULES,ALUMINIUM (outer wooden case)
CALORIMETER,JOULES,ALUMINIUM (outer wooden case)
Description:
• Polished aluminium container placed in an outer wooden case with thermometer, plastic top fitted with two terminals for heating coil and a hole for thermometer.
Product Code :- CLM/PHY/H-030
CALORIMETER,JOULES,COPPER
Description:
• Nickel plated copper calorimeter of 63 x 63 mm lagged.
• Enclosed in an outer vessel of 80 x 90mm size.
• With cover having terminals.
• Heating coil suitable for 3-6 V supply and holes for thermometer & stirrer.
• With stirrer but without thermometer.
Product Code :- CLM/PHY/H-031
BLOCK CALORIMETER
Description:
• For the experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks, mass 1 kg. adjusted to an accuracy of ±2%. Each block is drilled with two holes, a large central hole, 12.5 mm. diameter, for special immersion heater and a smaller hole, 7.5 mm. diameter, for a thermometer or temperature sensor.
| Product Code | Metal | Diameter mm. | Height mm. | Specific Heat J/Kg/K |
| CLM/PHY/H-032A | Aluminium alloy | 76 | 86 | 878 |
| CLM/PHY/H-032B | Mild steel | 44 | 91 | 480 |
| CLM/PHY/H-032C | Copper | 44 | 81 | 361 |
| CLM/PHY/H-032D | Brass | 44 | 86 | 368 |
IMMERSION HEATER
Description:
• Specially designed heater for use with metal block calorimeter 12 volts, 50 watts.
• Electrical connection is via 30 cm leads with heat resisting insulation, terminating in 4 mm sockets.
Product Code :- CLM/PHY/H-033
ALUMINIUM CONTAINER
Description:
• For use with above, 160 x l00 mm (diam x ht), with carrying handles.
Product Code :- CLM/PHY/H-034
CONTINUOUS FLOW CALORIMETER,CALLENDER and BARNES
CONTINUOUS FLOW CALORIMETER,CALLENDER and BARNES
Description:
• For electric equivalent of heat of liquids.
• A glass tube, 360 mm long, containing manganin spiral heating element with screw terminal at each end, is connected to inlet and outlet cylindrical vessels.
• Each having a tubule for thermometer.
• The inlet system has a long vertical vent tube to allow air bubbles in the incoming water to escape.
• Mounted on wooden base, but without constant level tank or thermometer.
Product Code :- CLM/PHY/H-035
CONSTANT LEVEL TANK
Description:
• A brass vessel of 100 x 75 mm.
• With tubules for water inlet, outlet and overflow.
• With ring and screw for fixing to a stand.
• Supplied without stand.
Product Code :- CLM/PHY/H-036