Description:
• An aluminium track ,1720x150 mm wide with levelling screws. Aluminium pulley 50mm dia.clamp for vibrator and automatic pen release. Aluminium trolly 690x80x65 mm ,with three wheels mounted on ball bearings, five holes to accommodate cylindrical masses each approximately 350gms. Vibrator 600 mm long with clamping marks at 5 and 8Hz and pen holder with one each wood block 150x75x13 mm, 150x75x23mm and 150x75x50mm .With pen and paper.
Product Code :- CLM/PHY/MECH-0207

Comprises 20 each of the following :
• Glass tube 125 x 8 mm length x diameter.
• Rubber tube 100 x 8 mm, length x bore.
• Rubber stopper two hole.
• Plastics rod 25 x 6mm, length x diameter.
• Wire hook (paper clip) crocodile clip index; 200 metal washers; one ball of cord 30 m.
Product Code :- CLM/PHY/MECH-0208

Description:
• Comprising a platform, 310 x 310 mm.
• The large diameter bearing is designed to withstand off centre forces at the same time allowing free rotation.
• The base is fitted with anti-slip rubber feet.
Product Code :- CLM/PHY/MECH-0209

Description:
• A glass tube of 6 mm bore is contained in an enamelled and lacquered brass case, mounted on a polished wooden board with plates for fixing to wall, open plate reflectors and ring and screws for vertical adjustment .The silvered scales, graduated in inches and mm are read by vernier moving by Rack and pinion to 1/200 in and 1/10 mm and are enclosed in glass cylinder. A glass cylinder at the lower end of the barometer is provided with an ivory point to which the level of the mercury in the cistern is adjusted before readings are taken. A ring support and three locking screws at base of instrument provide a means of securing the barometer in a vertical position. Fitted with thermometer with centigrade and Fahrenheit scale. Supplied without mercury but with instructions for filling the Barometer. 
Product Code :- CLM/PHY/MECH-0210

Description:
• For Fortin’s barometer made of wood nicely polished with three sides glass panels.
Product Code :- CLM/PHY/MECH-0211

Description:
• For surface tension investigations and to estimate the molecular size, using an oil film on water. Consists of,
• 2 trays,
• 4 metal brooms,
• 8 leveling wedges, • 16 mounted wire loops,
• 8 graticules & special holders, olive oil,8 beakers 10 ml, lycopodium powder, 2 dispensers, camphor, paraffin wax, vegetable black, one paint brush, one paint can and 2 sponges
Product Code :- CLM/PHY/MECH-0212

Description:
• A horizontal frame is mounted on a rod fitted to a base & carries a steel wire stretched across it, the tension of which can be adjusted by a tightening screw. A light weight metal pointer with a counterpoise is attached to the centre of the wire by a clamp. A pan is hung from a notch in the pointer and has a hook at its underside from which can be suspended a light weight rectangular frame or a metal clip to hold a microslide edge. The tip of the pointer moves over a graduated scale. With rectangular wire frame, slide clip, six microslides & 3 metres of spare wire.
Product Code :- CLM/PHY/MECH-0213

Description:
• For demonstrating the relationship between capillary pressure and the bore diameter of the capillary tube.
• The apparatus comprises of a metal frame arrangement whose base is like a trough and the upper part of the frame supports six capillary tubes of different box.
• The trough is filled with water and the difference in heights of the resulting columns of water in the tubes is readily apparent.
• Overall height of frame 90 mm., length of capillary tubes 150 mm.
Product Code :- CLM/PHY/MECH-0214

Description:
• Two dimensional. Four metal trays with cork lined bottoms and vertical sides 300 x 200 x 19 mm. With 100 small coloured glass marbles and 8 large marbles of 25 mm diam. 
Product Code :- CLM/PHY/MECH-0215

The apparatus consists of a clear Perspex tube:-
• 380mm long x 50 mm outside diameter provided with a light.
• Freely sliding expanded polystyrene piston and a loose fitting metal cap.
• The tube is mounted by means of a bayonet-type fitting in a metal cap, upon a polished wood motor housing 170 x 170 x 130 mm high.
• A low voltage d.c motor is contained in the housing and is coupled to a crank-driven agitator. The push rod of the agitator carries a light plastic
piston which oscillates in the lower end of the tube.
The apparatus is supplied complete with a supply of 3 mm dia metal spheres and four card board loading discs. Overall dimensions assembled
170 x 170 x 20 high.
Product Code :- CLM/PHY/MECH-0216

Description:
• For the observation of ‘Brownian Motion’ in smoke particles. • Consists of a box with plastic lid as well as flanges that allow easy attachment to standard microscopes. • The box contains a smoke cell, cylindrical condensing lens and a 12 V 3 W festoon bulb. • Apparatus preset to focus the light at correct height. The set is supplied complete with detailed instructions and a squeeze bottle type smoke generator. • Dimensions 90 x 46 x 20 mm.
Product Code :- CLM/PHY/MECH-0217

Description:
• 100 x 80 mm , Aluminium, with handle.
• Used with overflow can Cat No. CLM/PHY/MECH-024 for collecting the liquid flowing from spout.
Product Code :- CLM/PHY/MECH-0218

Includes:
(1) Capillary Tube
(1) Plastic Base
• This apparatus consists of a set of five interconnecting glass tubes of different diameters in order to demonstrate the phenomena of
capillarity and surface tension.
• Supplied on plastic stand.
Product Code :- CLM/PHY/MECH-0220

Description:
• High quality steel ball bearings.

Description:
• Mechanical Training Module Single Stage-Spur Gear :Specially designed modules help explore some of the fundamental and most frequently used mechanisms in the various machine elements and give a deep understanding of transfer of motion and power, which is very essential for any student of engineering or mechanics All the components are designed and fabricated to a high degree of precision, ensuring complete interchangeability among various modules No special skill is required to assemble or disassemble them.
Product Code :- CLM/PHY/MECH-0222

Description:
• To demonstrate linear expansion by heating.
• Comprising of an arrangement mounted upon a metal sheet base.
• With large scale for easy view of expansion.
• Supplied with one each of aluminium, brass and iron expansion bars.
Product Code :- CLM/PHY/MECH-0223

Description:
•  Demonstrates that the horizontal component of the velocity of a body thrown vertically upward from another body moving horizontally is the same as that of the body moving horizontally and independent of the vertical component of velocity. Thus, a ball ejected from the vertical barrel of the Ballistic Car moving with uniform velocity return back to its original position into the barrel. The apparatus consists of a heavy metallic barrel mounted vertically on an aluminium car. The car has plastic wheels with ball bearings to minimize friction. Spring - loaded piston arrangement with two compressions settings of spring for ejecting the ball to two different heights. Complete with steel ball and a lock -pin with cord. With instructions.
Product Code :- CLM/PHY/MECH-0224

Description:
• This is a versatile timer quartz crystal controlled for very high accuracy, which can be used for conducting experiments related to timing and motion with high accuracy. Can be used for G by free fall linear air tracks, dynamic trolleys etc. This timer has an in built power supply for the coil for G by free fall apparatus and lamps for photo gates. Range : 0.001, 0.01, 0.1 Sec. The above timer has a built in power source for CARELABMED photo gates and the coil for ‘G’ by free fall apparatus. Displays : LED 14 mm. Input : 110 or 220 Volts(specify while ordering)
Product Code :- CLM/PHY/MECH-0225

Description:
• There is a lever at the top of the body when this lever pressed for the first time, the watch starts, when the same lever is pressed for the second time, the watch stops. A third press on the lever brings the watch to zero reading.
• Chrome plated steel case, non rusting, dust and damp proof, jewelled lever movement bold figures, white dial and black steel hands.
• With start, stop and reset button • 0-60 minutes and 0-60 seconds.
• Stop Watch, 1/5th sec.
Product Code :- CLM/PHY/MECH-0226

Description:
• Made of aluminium metal, with tube for connection to pump and stopcock for air regulation on central pillar, supplied with a rubber seal which facilitates sealing in bell jar experiments. Mounted on painted heavy tripod base. Diameter of Plate:-

Description:
• Oil free vacuum pump, exclusive oil-less construction of piston or diaphragm never requires lubrication, practically maintenance free, portable light weight die-cast aluminium components. Balanced eccentrics provide smooth, low vibration operation.Built in micro-air filter, fitted with metal round plate.

Product Code :- CLM/PHY/MECH-0228A- Vacuum Pump ModelCLMVAC-I 
Product Code :- CLM/PHY/MECH-0228B- Vacuum Pump ModelCLMVAC-II