Description:
• Inclined wood plane 600 x 75 mm with pulley at one end.
• Other being hinged to wood base.
• A metal linear scale is fixed to edge of plane & a vertical linear.
• Angular 0-45° scale is fixed to base, with a clamp which also serves as an index.
• With a metal roller, a wooden block and a scale pan with cord.
• size of roller 75 x 25 mm length x diam.
Product Code :- CLM/PHY/MECH-0184

Description:
• Hinged to base at one end carries a pulley at the other, 600 x 75 mm plane.
• A movable block enables variation of inclination of plane.
• A friction slide 100 x 65 mm which is reversible and has one side cut away for half of its area.
• Complete with metal roller with pan but without masses.
• 75 x 25 mm diam.

Description:
• Consists of 5 plywoood beams with grooves. Supplied with 4 fulcrums & 40 metal blanks 25mm square.Consists of 5 plywoood beams with grooves. Supplied with 4 fulcrums & 40 metal blanks 25mm square.
Product Code :- CLM/PHY/MECH-0186

Description:
• A one metre long rule, graduated in mms • Numbered in cms and drilled every 2 cm. • With a set of three riders & pins • One acting as fulcrum and the other two as mass hangers.
Product Code :- CLM/PHY/MECH-0187

The distinction between mass and weight, for investigating the nature of mass:-
• Two metal trays 130 x 55 x 23 mm are joined together with two spring steel strips of 10 mm width.
• Distance between the trays being 215 mm.
• One tray is drilled to accept 3 equal cylindrical masses.
• The other tray can be clamped to a bench horizontally or vertically.
• Complete with 3 masses and a ‘G’ Clamp.
Product Code :- CLM/PHY/MECH-0188

Description:
* Wooden friction board.
* 490 x 70 x 20mm with three different sliders (all 140 x 70 x 20mm).
* Comparing friction between different surfaces:-
    • a wooden slider with hook; 
    • a plain aluminium slider; and 
    • an aluminium slider with rubber backing.
* Long aluminium plate is also provided for covering the friction board, for further comparisons.
Product Code :- CLM/PHY/MECH-0189

Descripton:
• Metal based board measuring 45 cm x 15 cm.
• Hinged at one end supporting a scaled planed board.
• The planed section can be inclined and fixed at any angle from 0-45° degree to the horizontal measured on the attached angle measurer.
• The end of the inclined board features an adjustable pulley wheel from which masses can be suspended.
• Without weights.
• Pan and roller included.
Product Code :- CLM/PHY/MECH-0190

Description:
• Designed specially for students.
• Made entirely of heavy gauge steel, the base and plane are connected by a hinge, allowing the plane to be clamped at any angle from 0 to 45°.
• Vertical displacement, angular displacement and distance from the hinge can be measured with built in scales.
• The pulley can be adjusted to ensure that the cord runs parallel to the plane.
• Board dimensions 600 x 100 mm.
• Pan and roller included.
• Complete with instructions and accessories.
Product Code :- CLM/PHY/MECH-0191

Description:
• The brass wheel is 7.5 cm in dia. 3 cm at its rim, carefully balanced and all three pairs of pivots are adjustable. Complete fitted on stand.
Product Code :- CLM/PHY/MECH-0192

Description:
• Fitted on wooden base.
Product Code :- CLM/PHY/MECH-0193

Description:
• Made of wood, One meter long with fulcrum lever is graduated in centimeters and is balanced on the fulcrum by a transverse groove cut midway in the length of the lever over knife edge of the fulcrum, supplied with 2 sets of 100 g weights.
Product Code :- CLM/PHY/MECH-0194