Our All Products
GRAVITY
.png)
FLY WHEEL
Description:
• Cast iron, approx. 200 mm diam. 35 mm thick at rim, mounted on ba anced horizontal shaft in metal bracket drilled for wall mounting. Complete with index rod & thread with hook.
Product Code :- CLM/PHY/MECH-0195
COMPOUND PENDULUM,KATERS,REVERSIBLE
COMPOUND PENDULUM , KATERS, REVERSIBLE
Description:
• Stainless steel rod 1200 mm long, l0 mm diam. with one pair each of small & large, light & heavy masses, two steel knife edges in adjustable holders & a metal bracket support drilled for wall mounting.
Product Code :- CLM/PHY/MECH-0196
GUINEA AND FEATHER APPARATUS
Description:
• A glass tube 600 x 38 mm fitted with two rubber bungs, one of which is bored & fitted with a 8 mm diam. tube for connection to a vacuum pump.
Product Code :- CLM/PHY/MECH-0197
MICROBALANCE KIT
Description:
• A kit for eight student enabling each to build up a workable (Straw Beam) micro balance with which quite accurate weighings can be made.
| Contents |
| 9 wooden base blocks 38 x 38x 19 mm |
| 9 wooden index strips 150 x 19 x 1.5 mm |
| 9 rubber bands, 50 mm long |
| 9 balancing screws 50 mm long |
| 9 needles fine ,for pivots |
| 9 balancing screws 12.5 mm long to fit straws |
| 9 aluminium bearing channels 50 x 16 x 26 mm deep |
| 100 Drinking straws |
| Complete with equipment notes |
Product Code :- CLM/PHY/MECH-0198
DYNAMOMETER,RINTOUL
Description:
• Spring with zero adjustment,scale 0-500g x 100g , spring extends 20 mm / 100g, with scale pan dia 75 mm.
Product Code :- CLM/PHY/MECH-0199
BENDING OF BEAM ASSEMBLY
Description:
• For determining young’s modulus for the material of a beam when supported at its extremities.Comprising a metal chrome plated bar 1 metre long, resting on the knife edges of 2 heavy table clamps, hanger with knife edge support to rest on the beam with micrometer or spherometer attachment and with electric contacts.But without weights.
Product Code :- CLM/PHY/MECH-0200
FOOT PUMP
Description:
• Foot Pump for use with Boyle’s law apparatus demonstration.
Product Code :- CLM/PHY/MECH-054
LIQUID LEVEL APPARATUS
Description:
• Four glass tubes of different shapes & cross sectional areas are connected to a common horizontal tube.
| Product Code | |
| CLM/PHY/MECH-055 | Mounted on plastic base |
| CLM/PHY/MECH-056 | Mounted on wooden base |
CARTESIAN DIVER
Description:
• To demonstrate transmission of pressure by liquids.
Product Code :- CLM/PHY/MECH-057
MERCURY TRAY
Description:
• Of polished hard wood 25 mm deep ,with hole and peg in corner.
Product Code :- CLM/PHY/MECH-0203
| Size in mm | 0.01 | 0.02 |
| 230 x 230 | 600 x 300 |
VACUUM GAUGE (MANOMETER) BENNERT
VACUUN GAUGE (MANOMETER) BENNERT
Description:
• To be used as differential manometer • Pressure gauge and vacuum gauge close tube fitted with • Mercury with stopcock and sliding mirror • Scale graduated 200-0-200 x 2mm on wooden stand.
Product Code :- CLM/PHY/MECH-0204
SIPHON BAROMETER
Description:
• It is a serviceable barometer at a low cost yet sufficiently accurate. The whole column of mercury is visible. Scale is graduated in both English and Metric systems. Zero point adjustment is carried by a screw clamp attached to glass tube. Complete fitted on a polished wooden board supplied without mercury.
Product Code :- CLM/PHY/MECH-0205
SIPHON BAROMETER TUBE
Description:
• A tube 90 cm. long and with bulb on shorter limb. For use with Cat No. CLM/PHY/MECH-0205.
Product Code :- CLM/PHY/MECH-0206