Description:
• Aluminium, diam. 50mm, in metal frame, with two hooks.

Description:
• Aluminium, diams. 50 and 40mm, in metal frame with two hooks.
Product Code :- CLM/PHY/MECH-0130

Description:
• Aluminium, diams. 50, 40, 28 mm, in metal frame with two hooks.
Product Code :- CLM/PHY/MECH-0131

Description:
• Diam. 50 mm, in metal frame, with two hooks.

Description:
• Diams. 50, 40, 28 mm, in metal frame, with two hooks.
Product Code :- CLM/PHY/MECH-0133

Description:
• Aluminium, one piece triple pulley, with diameters of 38, 50 and 62 mm, with one hook.
Product Code :- CLM/PHY/MECH-0134

Description:
• Aluminium, one piece triple pulley, as above, in metal frame with rod.
Product Code :- CLM/PHY/MECH-0135

Description:
• Aluminium pulley, diam. 50 mm, in metal frame, for clamping to board or bench upto 25 mm thick.
Product Code :- CLM/PHY/MECH-0136

Description:
• Aluminium pulley, 70 mm diam. in metal bracket with two clamping screws for bench and rod support respectively. The bracket may be clamped to a board or bench edge upto 38 mm thick, screwed to a flat surface or held in a 13 mm diam. support rod.
Product Code :- CLM/PHY/MECH-0137

Description:
• Aluminium pulley, 38 mm diam, mounted on a light alloy rod 150 x 10 mm.
Product Code :- CLM/PHY/MECH-0138

Description:
• As above, but with clamp for bench mounting.
Product Code :- CLM/PHY/MECH-0139

Description:
• Triple, Plastic pulleys 50 mm diameter are carried in tough plastic frames. Bearing pin is easily removable and has a simple locking arrangement which prevents the pin accidentally coming out. Blocks are provided with metal hooks.
Product Code :- CLM/PHY/MECH-0141

Description:
• Comprises a set of components from which pulley blocks of many different configuration may be made up. This versatile set is an economical alternative to providing a similar range of options using separate discrete pulleys. Set contains 15 plastic pulley frames, 5 each of single, double and triple sheave, each provided with a removable bearing pin and a pair of hooks. 30 plastic plain bearing pulleys, 10 each of diameters 25, 38 and 50 mm.
Product Code :- CLM/PHY/MECH-0142

Description:
• 50 mm aluminium pulley has a universal frame and can be clamped in any position to a wall, bench, drawing board, edge of a table or fitted to retort stand rod of diameter 12.5 mm Its two clamping screws for easy working.
Product Code :- CLM/PHY/MECH-0143

Description:
• Dia. 7mm. The pulleys are push - fit type on 2mm dia. axle/ shaft. Pk of 10.
Product Code :- CLM/PHY/MECH-0144

Description:
• Simple & Economical version of Pulley set. A simpler version of Cat No.CLM/PHY/MECH-0146, with fewer components. Set includes. Pulleys: 8 single, 2 double sheave, CARELABMED ball bearing frictionless pulleys. Wooden base: 20 x 15 cm fitted with one vertical rod of size 61 cm x 12.5 mm and one horizontal rod size of 20 cm x 9.5 mm with clamp. Tommy bar to tighten vertical rods: 1 Hooked Masses : Brass, with hooks. 1 x 10 gm., 2 x 20 gm., 1 x 50 gm., 1 x 100 gm., 2 x 200 gm., 1 x 500 gm. 1 x 1000 gm.
• Collars with hook : 6
• Right angled clamp: 1
• Wheel & axle : 1
• Cord: 1 roll
• Total 9 weights
Product Code :- CLM/PHY/MECH-0145

Description:
• A highly versatile apparatus for the demonstration of various concepts associated with pulleys and their configurations. Consists of a formica covered, rectangular, wooden base 81 x 20 cm with two sockets on its top in which metal rods of diameter 12.5 mm and length 81 cm can be screwed in vertically. At the top of the vertical rods, two right angled clamps support a horizontal rod of the same size. Eight collars with hook are provided and can be inserted on the horizontal rod for suspending various pulleys. A capstan is fitted on the wooden base at one end, with a hook for attaching a pulley at the other end of the base. All items housed in cardboard box. Instructions included.
Set includes:-
1. Pulleys: 7 single, 2 triple tandem, 2 quadruple
2. Wooden base: 81 x 20 cm fitted with 2 sockets, a capstan and an eye hook
3. Rods: 3 (diameter 12.5 mm and length 81 cm)
4. Collars with hook: 8
5. Right angled clamps: 3
6. Wheel & axle: 1
7. Cord: 1 roll
8. Tommy bar for tightening vertical rods: 1
9. Masses Brass: slotted. 2 x 10 gm, 2 x 20 gm, 2 x 50 gm, 4 x 100 gm, 4 x 200 gm, 1 x 500 gm, Total 15 weights
10. Weight hangers: Brass. 5 x 50 gm, 1 x 20 gm, 1 x 10 gm, Total 7 hangers
Product Code :- CLM/PHY/MECH-0146

Description:
• For demonstrating the effciency and coefficient of friction.
• Grooved light alloy platform.
• 17.5 cms diameter & screw with 12 mm pitch square thread.
• Cast iron base with arm and clamp for holding pulley on stem at any height.
• With scale pan 15 cms diameter and 2 meter cord .
Product Code :- CLM/PHY/MECH-0147

Description:
• For demonstrating the relationship between velocity ratio and number of teeth. Three gear weels,approximately 60,80,110 pitch diameter ,with 12,18,24 teeth respectively ,each mounted on wooden board provided with grooves for wheels by changing belt. Overall dimensions approximately 240x260x300mm.
Product Code :- CLM/PHY/MECH-0148

Description:
• Apparatus comprises wooden frame with diverging rails and a double ended cone. The inclined plane consist of two tapered slats conversing at their lower ends. When the double ended cone roller is placed on the plane ,it rolls towards the high end. Thus the centre of mass of the roller is lowered as the roller moves “up” the slope made of hardwood polished. Dimensions :700x40x70mm.
Product Code :- CLM/PHY/MECH-0149

Description:
• 4 balls with securing eyes made of brass, aluminum, steel and plastic for constructing a mathematical pendulum. Diameter: 25 mm. Product Code :- CLM/PHY/MECH-0150

Description:
• Any one of the pendulums can be adjusted without disturbing the others. 28 cm long clamp consists of a support arm attached to a rod clamp. Thumb screws keep suspended cords secure.
Product Code :- CLM/PHY/MECH-0151

Description:
•  Comprises a meter rule with zero at the bottom, graduated in millimeters and reading every centimeter attached vertically on a support rod.
• Designed for performing a number of pendulum related experiments quickly and accurately.
• Towards the upper end of the rod a hanger is fixed, from which 3 pendulum bobs, each of 25mm diameter.
• Bobs in different material - wood, steel and aluminium, are suspended.
• A sliding index mounted on the meter rule can be adjusted for vertical position and has a projection through which first pendulum cord passes thus controlling the effective length of suspension of first pendulum.
• Complete assembly mounted on a stable metal stand & the hanger has provision for controlling the length of suspension of each pendulum.
Product Code :- CLM/PHY/MECH-0152